HomeToolsMotion Blur & Ghosting UFO Test
TOOL #24 • DISPLAY OVERDRIVE • PURSUIT CAMERA SIMULATOR

Monitor Motion Blur, Ghosting & Overdrive UFO Test

Test your gaming monitor for pixel response time (GtG), LCD ghosting trails, and inverse overshoot coronas. Compare high refresh rate multi-lane persistence blur and simulate Black Frame Insertion (BFI / DyAc / ELMB).

Live Motion Pursuit StageTrack the moving targets with your eyes across the screen
Detected: Measuring...
How to Test: Keep your eyes locked onto a moving ship as it travels left to right. Note if trailing smearing (ghosting) or bright halos (overshoot) appear behind or in front of the target.
Check Frame Skipping (Hz Test) →
Pursuit Speed960 px/sec

Standard esports tracking speeds. 960 px/s represents fast mouse flicking in CS2/Valorant.

Overdrive Voltagenormal

Simulate LCD voltage overdrive response: Off causes trailing smear, Extreme causes inverse coronas.

Backlight Strobing (BFI)Off

Simulates DyAc+ (BenQ), ELMB (ASUS), or ULMB (NVIDIA). Strobes black frames between refresh cycles to eliminate retinal persistence blur.

Understanding Ghosting vs. Inverse Overshoot

Modern high-refresh gaming monitors (Fast-IPS, OLED, and Fast-TN) manage pixel transitions differently. Here is how to diagnose your display results:

1. Classic Ghosting (Slow GtG)

Occurs when liquid crystals take longer than the refresh window (e.g., >4.16ms on a 240Hz panel) to shift between color states. You see a dark, blurry tail trailing behind moving objects.

Fix: Increase monitor Overdrive setting by 1 notch in your OSD menu.
2. Inverse Ghosting (Overshoot)

Occurs when monitor overdrive voltage is pushed too aggressively ("Extreme" mode). Pixels overshoot their target color value, leaving a bright white or cyan ghost halo ahead of or behind the moving target.

Fix: Lower Overdrive from "Extreme" to "Fast" or "Normal".
3. Eye-Tracking Persistence (MPRT)

Even with instantaneous 0.03ms OLED pixel response, moving objects blur on sample-and-hold displays due to the human retina holding the frame on the eye. Only higher Hz (360Hz+) or backlight strobing (BFI / DyAc) clears persistence blur.

Fix: Enable DyAc / ELMB / ULMB 2 in your monitor settings.

Frequently Asked Questions: Motion Blur & Pursuit Testing

What is the difference between GtG and MPRT?

Gray-to-Gray (GtG) measures how fast a physical pixel changes from one color to another. Moving Picture Response Time (MPRT) measures how long a pixel remains continuously visible on your retina. 1ms GtG can still have 16.7ms MPRT on a 60Hz display.

Should I enable Black Frame Insertion (BFI) while G-Sync is active?

Most monitors cannot run BFI and Variable Refresh Rate (VRR/G-Sync) simultaneously because strobing at fluctuating framerates causes severe screen flicker. Premium monitors supporting ASUS ELMB-Sync or BenQ DyAc+ with G-Sync offer the best of both worlds.